Regresar a Artículos Indexados
  • EUROPEAN SCIENTIFIC JOURNAL// (VOL. 14, NUM. 9)

    Volumen: 14, Numero: 9, Páginas: 455-479 pp.

    DISEÑO, PROGRAMACION E IMPLEMENTACION DE UNA RED DE PLC RS 485, CASO PRACTICO: LABORATORIO DE AUTOMATIZACION INDUSTRIAL EN UNA INSTITUCION DE EDUCACION SUPERIOR

    Abstract

    The objective of the research is to develop a network system based on PLC RS-485T, to monitor a mechatronic equipment called Assembly of Parts, in the Industrial Automation Laboratory of the School of Systems Engineering of the Polytechnic School of Chimborazo. The research was developed based on the scientific method, and two Twido 20DTK PLCs were used, one PLC as Master and another PLC as Slave. The software for the monitoring of the network was carried out in the software called Labview version 7.1 and the TwidoSoft version 3.5 for the PLC coding. The communication between the different Twido 20DTK PLCs was obtained under the Labview 7.1 monitoring graphical interface; applying the data transfer in the RS-485T PLC network, improving the data transmission speed and avoiding that they are lost during the transmission, obtaining 70 percent the Ethernet network and 95 percent the industrial network, checking the reliability 75 percent in the Ethernet network and 100 percent in the industrial network, the speed in 75 percent in the Ethernet network and 100 percent in the industrial network and prevents the loss of information by 50 percent in the Ethernet network and the 100 percent in the industrial network; demonstrating the values obtained in an RS-485 Ethernet network. The developed system is applied sequentially, each time the sensor detects movement of an object (piece of the pallet) during the assembly, which was reflected in the user interface, changing color. In addition to the use of Modbus technology, the integration and communication of the PLC's was achieved, thus improving learning by observing in the computer the process of assembling parts.


    Keywords


    PLC ?s, Design, Programming, Implementation, Automation


    Resumen

    El objetivo de la investigación es desarrollar un sistema de red basado en PLC RS-485T, para monitorear un equipo de mecatrónica denominado Ensamblador de Partes, en el Laboratorio de Automatización Industrial de la Escuela de Ingeniería en Sistemas de la Escuela Superior Politécnica de Chimborazo. La investigación se desarrolló basándose en el método científico, y se utilizó dos PLC?s de marca Twido 20DTK, un PLC como Maestro y otro PLC como Esclavo. El software para el monitoreo de la red se lo realizó en los softwares denominado Labview versión 7.1 y el TwidoSoft versión 3.5 para la codificación del PLC. Se obtuvo la comunicación entre los diferentes PLC Twido 20DTK bajo la interfaz gráfica de monitoreo Labview 7.1; aplicando la transferencia de datos en la red de PLC RS-485T, mejorando así la velocidad de transmisión de los datos y evitando que se pierdan durante la transmisión, obteniendo el 70 por ciento la red Ethernet y el 95 por ciento la red industrial, comprobando la confiabilidad en un 75 por ciento en la red Ethernet y el 100 por ciento en la red industrial, la velocidad en un 75 por ciento en la red Ethernet y el 100 por ciento la red industrial y evita la pérdida de información en un 50 por ciento en la red Ethernet y el 100 por ciento en la red industrial; demostrando los valores obtenidos en una red Ethernet RS-485. El sistema desarrollado es aplicado de forma secuencial, cada vez que el sensor detecta movimiento de un objeto (pieza del palét) durante el ensamblaje el mismo que se reflejó en la interfaz de usuario cambiando de color. Además, con la utilización de la tecnología Modbus, se logró la integración y comunicación de los PLC?s, mejorando de esta manera el aprendizaje al observar en el computador el proceso del ensamblaje de piezas.


    Palabras Clave


    PLC ?s, Diseño, Programación, Implementación, Automatización





    Acceder